Less complexity, more performance: Lenze presents "The Best Axis Live" at SPS 2026

The drive and automation specialist Lenze is presenting new solutions for industrial motion tasks at the SPS 2026 in Nuremberg. The focus is on drive systems that combine mechanical components, frequency converters, and software. For intralogistics, the company is presenting, among other things, a system for sensorless positioning of conveyor systems as well as a decentralized drive platform for electric overhead and electric floor conveyors. Additionally, the manufacturer is showcasing applications for robotics, electronically synchronized motion axes, and the use of artificial intelligence during commissioning.

Dynamic positioning, changing loads, and high availability: The Beste Achse offers the suitable drive solution for demanding material flow and logistics applications. (Image source: Lenze)
Dynamic positioning, changing loads, and high availability: The Beste Achse offers the suitable drive solution for demanding material flow and logistics applications. (Image source: Lenze)

With the "Motor Drive System IE5/IE6," Lenze addresses motion tasks in conveyor technology for which conventional drive solutions do not offer sufficient positioning accuracy or dynamics, while a complete servo architecture incurs additional technical effort. The system combines motor, gearbox, frequency converter, and software into a coordinated drive unit.

According to the manufacturer, this allows for precise positioning of workpieces, synchronization of movements, and execution of dynamic start-stop processes. Positioning is achieved without an additional sensor, which eliminates the need for corresponding components and their wiring. The effort required for integration and commissioning is also expected to decrease.

Lenze states that the system has an overload capability of up to 300 percent. In conjunction with a high efficiency even in partial load operation, this should allow the drive performance to be designed closer to the actual requirements. According to the company, machine builders can reduce system costs by up to 30 percent compared to more complex drive solutions.

Decentralized Drive Technology for Electric Monorails

For in-house material transport, Lenze introduces the "Electric Monorail System". The platform is designed for electric overhead and floor tracks, where different drive tasks such as driving, lifting, lowering, and swiveling come together within a facility.

The core of the system consists of the decentralized frequency inverters "i550 motec" and "i650 motec". They are mounted directly on the respective drive axes. This reduces the need for central control cabinet technology, as well as for cabling and installation work.

The system also includes special gear units with disengaging clutches in three sizes, MF motors, and frequency inverters of the "i-series motec" with power up to 45 kilowatts. The components cover different motion and power requirements within a common platform.

For functional safety, the system supports the protocols Profisafe, Common Industrial Protocol Safety, and Functional Safety over Ethercat. Additionally, there is an integrated brake control for hoists. This allows for different motion tasks and safety-oriented functions to be implemented within a uniform drive architecture.

Centrally Control Multi-Axis MovementsOther exhibits are aimed at machine builders from the packaging industry and the production of fast-moving consumer goods. With the "Juggler," Lenze demonstrates the coordinated control of multiple motion axes. Horizontal and vertical axes throw and catch balls, illustrating the interplay of drive mechanics, power electronics, and control software. MCS servo motors and gearboxes, as well as the servo inverter "i950 cabinet DC-Link" with an integrated DC link system, are used. The c530 controller coordinates the movement sequences. The "FAST Electronic Camming" software enables the parameterization of complex motion profiles rather than fully programming them individually. According to the company, this should reduce development effort and simplify commissioning. The technology is specifically aimed at applications where multiple axes need to be precisely synchronized with each other.Integrate Robotics into Ongoing Production ProcessesWith the "Inline Robotics" exhibit, the manufacturer demonstrates how robots can be integrated into continuously operating machines. A delta robot removes products from a rotating turntable without interrupting its movement. The "Rotary Tracking" function synchronizes the robot's movements with the ongoing turntable. This way, shorter cycle times and a higher throughput can be achieved. The "FAST Robotics Template" serves to configure the robot movements. Additionally, a digital twin allows movements to be virtually tested and optimized before setting up the real system. This should help identify potential errors earlier and reduce the effort required for on-site commissioning.

Sensorless Synchronization of Winding Axes

For applications in battery production as well as in printing, material, and textile processing, Lenze presents the "Smart Synchro Winder." The exhibit demonstrates the electronic synchronization of two winding axes, which are operated without additional motor encoders.

The m650-U-IE5 motors used operate in an open loop. Their angular position is determined without additional position sensors. This eliminates the slip ring transmission of the corresponding sensor signals to rotating assemblies.

The two axes are electronically synchronized so that their movements correspond to a mechanical coupling. By eliminating additional sensors and signal transmission, the number of required components, as well as installation and maintenance effort, is expected to be reduced.

Artificial Intelligence for Commissioning and Diagnosis

In addition to drive technology, Lenze presents several approaches for using Artificial Intelligence throughout the machine lifecycle. As part of the "Innovation Beacon," the company showcases four applications and prototypes intended to support engineering, commissioning, and fault diagnosis.

A so-called Commissioning Agent guides users step-by-step through commissioning and diagnostic processes. Another application utilizes Artificial Intelligence for the automated optimization of drive parameters. The "LED-Analyzer" captures flashing fault codes via a smartphone and provides solution suggestions based on them.

Another approach concerns the integration of product and change information into development processes, as well as the planning and assessment of security updates. This aims to make information from various technical disciplines more accessible.

Under the label "Vibe Commissioning," Lenze is also examining how the commissioning of drive axes can be simplified in the future based on application descriptions. The approach relies on the interplay of artificial intelligence, technical expertise, and standardized data models. The announcement does not provide specific information on market readiness.

Mechanical Components and Digital Configuration

In addition to electronic drive technology, Lenze presents its expanded range of components and services. Under the label "Lenze Selection," the company offers additional mechanical drive elements. These include linear axes, spindle lift gears, actuators, brakes, and couplings.

The subsidiary Encoway complements the offer with software for configuration, calculation, and proposal generation in mechanical engineering. The company relies on rule-based product knowledge, which also serves as a foundation for applications with artificial intelligence.

Furthermore, the service offering includes consulting, engineering, training, technical support, spare parts, repairs, and modernization measures. These services aim to support machine builders and operators from planning through commissioning to ongoing operation.

Translated automatically from German.
Printer Friendly, PDF & Email

Branchenverzeichnis

09.11.2026
Different loads, transport goods, and space conditions require suitable conveyor technology. What characteristics distinguish the systems and how they can be complemented by drives, sensors, and...
19.10.2026
Melkus Mechatronic relies on recuperation in its driverless transport vehicles to recover kinetic energy during braking and lowering of loads. As the manufacturer from Göming near Salzburg reports...
01.10.2026
The frequency converter can take over drive-related control tasks and operate on individual machines without a higher-level control system. Users can choose between four industrial Ethernet protocols.
04.11.2026
Nord Drivesystems expands its offering for condition monitoring of drive systems with the modular solution "Nord Drive Monitor". The application for the industrial Internet of Things continuously...
01.10.2026
The IFM Electronic GmbH presents solutions for industrial image processing in mobile robotics as well as in production and assembly processes at the Vision from October 6 to 8, 2026, in Stuttgart. The...
21.08.2026
Shuttles, driverless transport vehicles, and conveyor technology continuously generate data and must be coordinated. Still shows the role Warehouse Control Systems play and why integrated solutions...