Make storage areas more efficient with pallet flow racking systems from Bito Lagertechnik.
The pallet flow racks from Bito combine classic pallet racks with inclined roller conveyors. The pallets are stored through one side of the rack and then move by gravity within the respective storage channel. This way, they are ready at the designated picking position without the need for each pallet to be individually transported within the rack.
The technology enables compact storage of larger quantities of goods and reduces the need for traffic areas within the warehouse. Especially in existing warehouse buildings, companies can create additional storage capacities without having to completely replace the existing facility. According to the manufacturer, the investment required is less than that of a fully automated storage solution.
Two Storage Strategies for Different Requirements
The pallet flow racks can be operated according to both the first-in-first-out principle and the last-in-first-out principle. Which variant is used depends on the requirements for goods flow, storage goods, and order of retrieval.
With the first-in-first-out principle, pallets are stored on one side of the rack and retrieved on the opposite side. The pallets that are stored first leave the storage channel first as well. This method is particularly suitable for products with limited shelf life or for goods whose batches and production series must be processed in a fixed order.
Stop locks ensure that the front-most pallet can be removed without back pressure from subsequent pallets. The spatial separation between loading and retrieval also prevents the respective forklift movements from overlapping directly.
In storage according to the last-in-first-out principle, loading and retrieval occur on the same side of the rack. Pallets are pushed into the storage channel against the slope with a forklift. The last pallet stored is thus the first one ready for retrieval. This variant is referred to as push-back racking.
Less Traffic Area and Shorter Transport Routes
According to Bito-Lagertechnik, up to 60 percent of storage space can be saved with pallet flow racks compared to conventional pallet racks. The compact arrangement of the storage channels allows larger quantities of goods to be accommodated on an available area.
Unlike block storage, the individual storage channels and the types of goods stored there remain directly accessible. This facilitates the targeted retrieval of individual groups of items without having to relocate other inventories beforehand.
Additionally, internal route times can be reduced by up to 40 percent. Shorter transport routes and the automatic provision of pallets at the retrieval side can accelerate order processing and support goods turnover.
Pilsner Urquell triples storage capacity
How flow-through technology can be used in practice is demonstrated by the brewery Pilsner Urquell. The company uses Bito Storage Technology's pallet flow racks for pallet picking. The storage includes a total of 2,000 pallets. Up to 29 pallets are stored one after the other in individual storage channels using the first-in-first-out principle.
According to the supplier, the brewery was able to triple its storage capacity by switching to the flow rack system. This also allows for fluctuations in inventory levels to be absorbed. In addition, the manufacturer reports largely damage- and disturbance-free pallet handling and a correspondingly low number of complaints.
The Badische Staatsbrauerei Rothaus also uses the systems for picking complete pallets. By making the switch, the company was able to increase its storage capacity. The pallets automatically move within the inclined storage channels, allowing for retrieval in the order they were stored.
New batches are stored on the loading side and integrated into the existing goods flow. The separate loading and retrieval sides help maintain a continuous supply for picking.
Deutsches Milchkontor combines tour preparation and buffer storage
At Deutsches Milchkontor, a pallet flow racking system with four levels is used in the loading zone at the goods outflow. The system was installed to expand storage capacity and better utilize the available storage space.
The company stores fresh products according to the first-in-first-out principle. Both Euro pallets and H1 plastic pallets are used.
The lowest rack level is used for tour preparation. Drivers can take the prepared pallets with electric pallet trucks and then load them. The rack levels above are used as buffer storage. In this way, the system combines the provision of outgoing goods with additional storage capacity in height.
Vet-Concept uses upper rack levels as replenishment storage
For the animal food manufacturer Vet-Concept, pallet flow racks are also part of the storage concept. The company produces and sells dry and wet food mainly through its own online shop.
For storing heavy feed bags and cans, Vet-Concept uses pallet racks with a total of approximately 6,000 storage spaces. In the upper rack levels, flow rack systems from Bito Storage Technology are installed, serving as replenishment and buffer storage.
The lower level is mainly used for picking. Since the stored animal food products have an expiration date, they are stored using the first-in-first-out principle. This aligns the retrieval sequence with the order of storage.
Use with high turnover and limited shelf life
The application examples show different ways to integrate pallet flow racks into existing warehousing processes. While pallet picking is the focus at Pilsner Urquell and Rothaus, Deutsches Milchkontor combines tour preparation and buffer storage. Vet-Concept, on the other hand, uses the flow technology for replenishing its picking areas.
Common to the applications is that larger quantities of goods are stored compactly and provided in a predetermined retrieval order. Particularly for products with a shelf life and fluctuating inventory levels, the gravity-operated flow technology can be an alternative to conventional pallet racks.
Translated automatically from German.







































